S5PC100 Evaluation Board / Development Kit

Prosoft World presents S5PC100 Evaluation Board(s5pc100 development kit) with all key features and supporting drivers Software Package available for Linux2.6.24, Ubuntu, WinCE6.0 and Android Application Development. S5PC100 Development Board is designed with Samsung ARM Cortex TM-A8 which implements the ARM architecture V7-A.

Block diagram

Development Board

Please Feel free for any query related to s5pc100 development board through contact us page or email s5pc100@prosoftworld.net

CPU

S5PC100 development board has made with MCU s5pc100 which is a 32-bit RISC low power, high performance micro-processor solution for mobile phones and general applications, and integrates 833Mhz CortexA8 which implements the ARM architecture V7-A with numerous peripherals to support. To provide optimized H/W performance for the 3G & 3.5G communication services, S5PC100 adopts a 64-bit internal bus architecture and includes many powerful hardware accelerators for tasks such as motion video processing, display control and scaling. Integrated Multi Format Codec (MFC) supports encoding and decoding of MPEG4, H.263, H.264 and decoding of MPEG2, VC1, Divx/Xvid. This H/W Encoder/Decoder supports real-time video conferencing and Analog TV out for NTSC and PAL mode, HDMI output for HDTV The S5PC100 has an optimized interface to external memory capable of sustaining the demanding memory bandwidth required in high-end communication services. The memory system has Flash/ROM external memory ports for parallel access and DRAM port for high bandwidth. DRAM port can be configured to support mobile DDR, LPDDR2, and DDR2. Flash/ROM Port supports SLC/MLC NAND Flash, NOR Flash, OneNAND and ROM type external memory. Overview To reduce total system cost and enhance overall functionality, S5PC100 includes many hardware peripherals such as TFT 24-bit true color LCD controller, Camera Interface, MIPI DSI, CSI-2 and HSI, System Manager for power management, CF+/ATA I/F, 4-channel UART, 24-channel DMA, 4- channel Timers, configurable General I/O Ports, 3-ch IIS, 2-ch S/PDIF, 2-ch CAN bus, IIC bus interface, 3-ch HS-SPI, USB Host 1.1 operating at full speed(12Mbps), USB OTG 2.0 operating at high speed (480Mbps), 3-ch SD Host & High Speed Multi-Media Card Interface and PLLs for clock generation.

Features

• Cortex TM-A8 based CPU Subsystem with NEON
• 32/32KB I/D Cache, 256KB L2 Cache
• 833MHz Operating Frequency
• 64-bit Multi-layer bus architecture
• Advanced power management for mobile applications
• ROM for secure booting and RAM for security function
• 8-bit ITU 601/656 Camera Interface up to 8M pixel for scaled and 16M pixel for un-scaled resolution
• Multi Format CODEC provides encoding and decoding of MPEG-4/H.263/H.264up to 30fps@HD(720p) and decoding of MPEG-2/VC1/Divx/Xvid video up to 30fps@HD(720p)
• JPEG codec support up to 30Mpixels/s
• 3D Graphics Acceleration with Programmable Shaderup to 10M triangles/s (Transform only)
• 2D Graphics Acceleration with BitBlitand Rotation, up to 40Mpixels/s
• 1/2/4/8 bpppalletized or 8/16/24bpp non-palletized Color-TFT support up to 2048x2048
• TV-out for NTSC and PAL mode and HDMI 1.2 interface support with PHY
• MIPI-HSI, MIPI-DSI and MIPI-CSI interface support
• 1-channel AC-97 audio codec interface, 2-ch PCM serial audio interface, and 3-channel 24-bit I2S interface support (5.1ch support)
• 2-channelS/PDIF interface support for digital audio
• 2-channel I2C interface (up to 400KHz) support including 1-channel for HDMI
• 3-channel HS-SPI, up to 52Mbps
• 4-channel UART including 4Mbps port for Bluetooth 2.0 and IrDA port for SIR/MIR/FIR
• On-chip USB 2.0 OTG supporting high speed (480Mbps, on-chip transceiver)
• On-chip USB 1.1 Host supporting full speed (12Mbps, on-chip transceiver)
• Asynchronous direct Modem Interface support including 16KB DPRAM
• 3-channel SD/SDIO/HS-MMC interface support including CE-ATA
• CF version 3.0 interface support for HDD
• 24-channel DMA controller
• Support 8x8 key matrix
• 10-ch 12-bit multiplexed ADC
• 2-ch CAN interface
• Configurable GPIOs
• Real time clock, PLL, timer with PWM and watch dog timer
• Memory Subsystem
• SRAM/ROM/NOR/NAND Interface with x8 or x16 data bus
• MuxedOneNANDInterface with x16 data bus
• 1-port Mobile DDR Interface with x32 data bus (up to 333Mbps/pin DDR)
• 1-port DDR2 interface with x16 or x32 data bus(333Mbps/pin DDR)
• 1-port LPDDR2 interface (up to 333Mbps/pin DDR)

Hardware Spec.

Board size: 50*80mm
CPU:Samsung S5PC100X, CortexTM-A8;frequency 833MHZ, up to 1GHZ;
DDRII SDRAM: 256MB DDR II
FLASH:1GB NAND FLASH
LCD interface: standard TFT 7' (800*480) screen, typical resolution rate: 1024*768;
HDMI: one, High-definition multi-media output, HDMI v1.2/DVI v1.0 compliant;
Y/Pb/Pr: one, component video output;
Touch screen:Four-line resistance;
TV output:one,composite video signal output, accessing to kinds of TV;
S-VIDEO interface:one,S-VIDEO video output;
TV input: one, composite video signal input;
VGA interface:One, Standard VGA output interface, resolution ratio 1024*768;
Audio:one AC97, wolf's WM9713;
Amplifier: 8O,2W;
SPDIF OUT: digital video output, can transmit PCM and Dolb yDigital, dts;
USB HOST:One USB HOST interface, adopting the restoration of self-insurance protection device to protect the external power system
USB OTG:One, USB 2.0 HS OTG
Serial port:four serial ports, baud rate as high as 115200bps;An IRDA infrared data communication port
Infrared communication port:one.
Ethernet port:one 10M/100M Ethernet port, DM9000AE, with connection and transmission indicator lights;
GPS module: one, SIF III, global positioning;
HSMMC card interface:one high-speed SD card interface, compatible of SD/MMC/MMC4.0 cards;
CF card interface:one , standard CF R3.0
JTAG interface:a standard 20-chip Multi-ICE JTAG interface , supporting the debugging of ADS1.2,SDT2.51,etc.
RTC clock:internal real-time clock (with the back-up lithium battery)
LED:power supply and several indicator lights.
Reset circuit: combining the manual reset and chip reset; the chip is MAX811; the reset is stable and reliable
Expansion interface:lead to the signal which users need, including the bus, interrupt, I/O signals, and so on.
Power interface:12V power supply, with power switch and indicator light.

Software resources

The supporting operating system :
Windows Embedded CE6.0;
WinCE6.0 Operating System:
BSP:WinCE 6.0 BSP
Windows Embedded CE 6.0 R3:
Device Driver:
WI-FI: 802.11b/g;
Ethernet port:10M/100M Ethernet port;
GPS:SIF III;
HDMI: HDMI output;
VGA: 1024*768;
TV-IN: accessing to kinds of CCD and CVBS input;
SD/MMC:high speed SD/MMC card 32G;
LCD: 800×480, 480×272 and 1024*768;
AUDIO: AC97;
MFC:Multi Format CODEC(H.264/MPEG4/VC1);
post processor:Video Post Processor;
JPEG:JPEG CODEC;
TV OUT:NTSC, PAL TV out(with Image Enhancement);
2D:2D Graphics driver;
3D:3D Graphics;
USB HOST:accessing to kinds of USB devices;
USB OTG: USB device
UART;
1G NAND FLASH;
128M/256M DDR II;
TOUCH;
Keypad: 8x8 keyboard scan;
RTC:Real time clock;
Support MP3 and MP4 playing;
Support kinds of websites, e.g. HTTP;
Support XIP start and HIVE ;
Support USB and SD card upgrading bootloader;

Please Feel free for any query related to s5pc100 development board through contact us page or email s5pc100@prosoftworld.net